LEGAL DISCLAIMERMusic Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part uponany description, photograph, or statement contained herein. Technical specifications, appearances and other informationare subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik,Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera and Coolaudio are trademarks orregistered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved.LIMITED WARRANTYFor the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty,please see complete details online at musictribe.com/warranty.Zhongshan Eurotec Electronics LimitedNo. 10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town,528451, Zhongshan City, Guangdong Province, China(12) Preset A/B footswitch – Tapping thefootswitch will toggle between the presetsassigned to slot A and B. Hold the footswitchto enter Preset Select mode for the currentslot (A or B), which allows the footswitch tocycle through all 5 saved presets.(13) On/Bypass footswitch – Tapping thefootswitch engages or disengages thedoubling and harmony effects in the currentpreset, leaving the reverb/delay effectsactive. Holding the footswitch will enterTuner/Bypass mode, which mutes the guitarsignal and bypasses all vocal effects exceptfor Tone.(14) USB port – Connect to a computer forfirmware updates and support.(15) Power input – Connect the included poweradapter. (12 V DC, 300 mA, tip negative)(16) OUTPUTS – Connect to a mixervia XLR cables.(17) INST IN/THRU – Connect your guitar to theIN jack, then connect the THRU to other guitarpedals or an amplifier.(18) MIC INPUT – Connect your microphone viaXLR cable.(19) GND – If you hear a buzz when you plugin a cable from the THRU to your amp orPA, press this button in. If the THRU jackis not used and your guitar sound is routedinternally, the Ground Lift switch should beleft out.Visit tc-helicon.com to download the full manual