TCL L28E3500 Service Manual

MS82MT-AP/LA Chassis Aliment procedurePRELIMINARY INFORMATION ----- SUBJECT TO CHANGE 13Color Analyzer CA-210. Video Pattern Generator Chroma2329. Color TV PatternGenerator PM5418, VGA cable, AV cable(RCA),YPBPR(RCA) cable.。Chroma2329 Fluke5418 CA-210According to the requirement of order, we suggest take the below steps to finishthe appropriate settings.A enter the Factory Menu, enable FAC HOTKEYB Check the version of software, release date displayed at the bottom of FactoryMenu. If the information is correct, you can ignore step C and D.C Enter Factory Main Menu, choose SERVICE MENU->PROJECT ID, choosecorresponding Project ID number of the product (Please refer to the description inBOM about Project ID number).D return to Factory Menu, check the Product model.E choose Factory Menu-> NVM RESET and press and wait until prompt OKappears.F restart the setG according to the requirement of order, set the items of Shop Menu and HotelMenu etc.H After aging under normal temperature, calibrate ADC and adjust white balance.I choose Factory Menu-> SHOP INIT and press button of remote control toinitialize the set.Note: after step I (execute SHOP INIT), Hotel Menu will be disabled by default.Therefore, if order requires hotel function, it is necessary to enable hotel function byset Factory Main Menu-> Service Menu->HOTEL ENABLE to ON.Ⅰ.signal and generatorVGA: Chroma2329 Pattern42, Timing 14(1024x768@60Hz 5 MOSAIC)YPBPR: Chroma2329 Pattern103, Timing 79(100% Color Bar, 720p)5 MOSAIC 100% Color Bar4. The steps of debugging4.1 Device4.2 steps of debugging：4.3 ADC Calibration