10ANTENNA/CABLEINPUTOutdoor or indoor AntennaCable Box,( Wall Outlet)RF CoaxialWire(75 ohm)OrOrConnect the RF coaxial cable on your home outlet to the ANTENNA/CABLE INPUT jack of this unit.Once all connections are complete, turn on the unit and begin the initial setup process, scanning forchannels in your area.Obtain the SignalThe first step in connecting your TV is obtaining the signal. The back panel of your TV allows you toreceive analog and/or digital channels by using the ANTENNA/CABLE INPUT.Before you connect your TV, you have to determine whether you will be using an antenna or a cableservice to obtain the signal.What You NeedAntenna (Rabbit Ears) Or Outdoor Antenna with Coaxial CablePlug the antenna or coaxial cable from the wall outlet into the ANTENNA/CABLE INPUT on the backof the TV. You are ready to receive off-air local digital and analog channels.Cable ServicePlug the coaxial cable from the wall outlet into the ANTENNA/CABLE INPUT on the back of the TV.You are ready to receive your cable channels.Set-Top BoxIf you have a set-top box, you may need to call your cable company or satellite service provider. Theymay recommend special cables to allow you to view digital channels.What You Need to Know• Visit www.antennaweb.org for help in deciding what type of antenna to use in order to receive thelocal digital channels available to you. Enter your location, and the program will list local analogand digital stations available using your antenna.• When you watch TV, the Channel Banner displays the type of channel currently viewed.