TCL L49P10FS Operation Manual

Contents

14Chapter 4 Menu Operationany operation, scheduled recording will startautomatically.- Repeat type: set different repeat modes for therecording.After you enter all the information, use ▲/▼ to selectOK, then press OK to add the schedule you set intoyour schedule list.4. Press the red button and repeat above procedures toadd another schedule.5. If you wish to edit a schedule, select it and press OKto enter. You can also remove the selected schedule bypressing green button.6. You can also enter EPG( Electric Program Guide)here by pressing blue button and operate according tothe on-screen guide.7. Press to close the menu.SettingsThe Settings menu allows you to configure the TVwith your preferences. For details, please refer to thefollowing Using System Settings part.Using System SettingsThe Settings menu allows you to configure the TV withyour preferences.Display the main menu by pressing and selectSettings, then press OK to display its options: Picture,Sound, Channel, Network, System and Applications.PictureThe menus for adjusting the picture are used to obtainthe best picture settings according to your preference,the type of program you are watching and the ambientlighting.Select Settings > Picture, then the Picture menuappears on the right with the following options. Press ►to enter and use ▲/▼to choose an option.Note: Some options may not be available for certainmodes. Some options may appear in the next page ofthe Picture menu, you can press ▲/▼ to switch.Picture preset: Use ◄/► to scroll through the picturepreset settings: Standard, Dynamic, Natural, Movieand Personal.Brightness: Adjusts the brightness of the picture.Contrast: adjusts the difference between light and darkcontent, recording protection). Please use on theremote control to check if the feature is available in yourproduct.1. Press on the remote control and select PVR.2. Press OK/► to enter. It starts to record automatically.3. Press on the remote control and use ▲/▼/◄/►to adjust the recording duration.4. Press OK to stop recording manually, the recordedfile will be saved. In normal operation, the recording willstop automatically when the recording duration expires.5. In recording, the PVR mini pane will also show on thescreen to indicate the recording progress.6. To watch the recorded program, exit PVR mode firstand go to > Apps > MediaCenter > All. Select thefolder PVR, then select the related record file. PressOK to play. (It is the same if you record a digital radioprogram).Notes:- This feature is available only for digital non encryptedchannels. Even when CICAM (CI or CI+) is inserted, thisfeature is not available on encrypted channels.- Before you connect the USB drive to the TV, makesure you have backed up the data in the drive to avoidthe loss of your important data due to unforeseenmalfunction.- The bigger the USB drive free memory for the PVRfunction, the bigger the recording length.- If you want to change channel or signal source duringrecording, store the recording data before changing thechannel or source.- The TV cannot play files normally if the parametersof the file exceed the limitations of the system, the fileformat is not supported, the file is damaged, or the filecannot be decoded.- Do not disconnect the USB drive when the system isreading a file or transmitting data, otherwise the systemor the drive may be damaged.Schedule ListThis function is used to perform scheduled recording.1. Press on the remote control and select ScheduleList.2. Press OK/► to display the schedule list.3. To add a schedule into your schedule list, press thered button first to display schedule information. Then,- Channel number: Press OK/► to enter, then use▲/▼ to select the channel number.- Start date: set the start date of the recording.- Start time: set the start time of the recording.- Stop time: set the stop time of the recording.- Schedule type:a. Set Reminder to be reminded that you can switchto the scheduled program when the time you haveset comes. When time is out and you do not executeany operation, the dialogue box will disappear and nofurther operation will be executed.b. Set Record, if you really want to start yourscheduled recording when the time you have setcomes. When time is out and you do not execute