TCL L49P10FS Operation Manual

Contents

8Network ConnectionYour TV will require an internet connection to operate all functions. Data usage charges may apply.Please refer to your Internet Service Provider (ISP) for additional information.To access the internet, you must subscribe high speed broadband internet service from your internet service provider.Your TV can be connected to your home network in two ways:• Wired, using the RJ45 (LAN) connector on the back panel.• Wireless, using the internal wireless or external wireless USB adapter and your home wireless network.Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network. Theconnection method may be different depending on your actual network configuration. If you have any questions aboutyour home network, please refer to your ISP(Internet Service Provider).Chapter 2 General OperationConnecting to a wired networkTo connect to a wired network:1. Ensure you have:• An ethernet cable long enough to reach your TV• A router or modem with an available Ethernet port• A high-speed internet connection• An Ethernet (LAN) port on the back of the TV2. Connect your ethernet cable to the router and to theEthernet port on the back of the TV.3. Use the Network Settings to configure the TV.Connecting to a wireless networkTo connect to a wireless network1. Ensure you have:• A router broadcasting a high-speed wireless signal• A high-speed internet connection2. Use the Network Settings to configure the TV.Built-in wireless connectionNote: Some models may have no internal wireless module,you can use wireless network by inserting external wirelessadapter into USB socket of the TV. Some external wirelessadapters can’t be compatible with the TV.