TCL LED32S4690 Operation Manual

Contents

General Operation1. Press the Menu button to display the main menu, andselect Setup > Channel install, then press the OKor right direction button to display its options2. Select Automatic search, then press the OK or rightdirection button to enter.3. Select Digital & Analogue (or Digital or Analogue), thenpress the OK or right direction button to start theautomatic search process.The search may take a few minutes. During theprocess, you can press Menu or Exit to abort halfway.4. Once the automatic search ends, press the Menubutton to return to the last step or press OK to restartyour channel search.5. After the automatic search, channels are arranged in apreset order. You can skip channels, modify the presetorder or rename channels, select Setup >Organiserand press the OK or right direction button to enter.Skipping channels: if a channel was stored twice orits reception is poor, you can simply skip it. Theskipped channels can not be selected by pressing thePROGRAM UP /DOWN button.Select the Channel skip option and press the OK orright direction button to display Channel skip menuPress the up or down direction button to select achannel and press the OK button to check the box.Sorting channels swaps two channels’ position1. Select the Channel sort option and press the OKor right direction button to display Channel sortmenu.2. Press the up or down direction button to select achannel, and press OK to confirm3. Press the up or down direction button to select yourswapped channel, and press OK to swap the twochannels.Edit channels: select the Channel edit option andpress the OK or right direction button to displayChannel edit menu Press the up or down directionbutton to select a channel you want to edit, then pressthe OK button to enter Press the up or down directionbutton to select Channel number or Channel name,using the digit keys to edit the channel number orchannel name, finally press OK to confirm.This allows you to update all available channels withoutaltering the sorting of existing channels1. Display the Channel install menu, press the up ordown direction button to highlight Automatic updateoption.2. Press the OK or right direction button to start to updatethe channels. To stop the update process, press theMenu button.3. When the search is completed, press Menu to return,or press OK to restart.Automatic UpdateAnalogue Manual scan1. Display the Channel install menu, press the up or downdirection button to highlight Analogue manual scan,press the OK or right direction button to enter.2. Press the up/down/left/right direction and number or OKbutton to search, fine tune or store the channel.3. Press Menu to return to the previous menu or pressExit to close the menu.Automatic Channel Set-upThis option allows the TV to search for, find and store allthe available analog and digital channels.Follow all the steps in turn specified hereafter.Antenna Manual InstallationAllows you to start manual searching the availablechannels from the current frequency or any frequencyyou input.(Only for digital channels)1. Display the Channel install menu, press the up or downdirection button to highlight Antenna manual installation,press the OK or right direction button to enter.2. Press OK to start search from the current frequency,or use digit keys to input a frequency, then press OKto start search.3. When the search is completed, press Menu to return,or press OK to restart.Clean Channel ListAllows you to remove all the searched channel from thechannel list.1. Display the Channel install menu, press the up or downdirection button to highlight Clean channel list, press theOK or right direction button to enter.2. Press the left or right direction button to select OK, thenpress OK to confirm to clean the channel list.10When you have finished press Menu to return or pressExit to close the menuBackExitSelectEnterMenuExitOKChannel installAutomatic searchAutomatic updateAnalog manual scanAntenna manual installationClean channel list ........................