TDSi DIGIgarde PLUS User Manual
Also see for DIGIgarde PLUS: Quick start guide
                                                                       | |
Contents
| 
Device SettingsDIGIgarde PLUS User GuideLast Change Copyright © 2012 TDSi13 May, 2016 Page 374.24.24.24.2 PowerPowerPowerPower mmmmanagementanagementanagementanagementUse this option to set the idle time (in minutes). If the DIGIgarde PLUS receives nokeypad or fingerprint input within the Idle Time, it will go into a low power standbymode. In this mode, the screen is blank and the scanning window is unlit. If a userpresses any key or places their finger on the scanning window, the DIGIgardePLUS ‘wakes’ and resumes normal operation.4.34.34.34.3 CommunicationCommunicationCommunicationCommunication ooooptionsptionsptionsptionsThe DIGIgarde PLUS fully supports RS232, RS485 and TCP/IP communications(see page 18 for connection details). Use the third option on the Options menu toset the Communication Options.Table 11 Communication optionsCommunicationOptionUse DefaultBaudRate Set the baud rate for communications: 9600,19200 38400, 57600 115200115200Dev Num Choose the unit number for this DIGIgardePLUS device: 1-2551Net Speed 10M-H, 100M-H, 10M-F, 100M-F, AUTO AUTOIP Address Define the IP address for this unit 192.168.1.201Netmask Define the Net Mask for this unit 255.255.255.0Gateway Enter the Gateway IP address for yournetwork.0.0.0.0Ethernet Enable or disable Ethernet communications YRS232 Enable or disable RS232 communications YRS485 Enable or disable RS485 communications NCOMM Key Security key required to establishcommunication between unit and PCsoftware. PC software must be configuredwith matching key.0Comm Opt ↓►BaudRate 115200Dev Num 1Net Speed AUTOOptions ↓System OptPower Mng►Comm OptPower Mng►Idle Min 5Options ↓System Opt►Power MngComm Opt |
Related manuals for TDSi DIGIgarde PLUS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine