TEC B-442 Owner's Manual
                                  | |
Contents
| 
7. SELF-PEELING FUNCTION EM1-33046A7. SELF-PEELING FUNCTIONFig. 7-1 Setting Up Printer for Self-Peeling Function1. Printer Carriage Release Lever 3. Self-peeling Roller2. Front Rubber Roller 4. Backing Paper7. SELF-PEELING FUNCTION1. Remove the printer’s front panel.Fig. 7-2 Printer Ready for Self-Peeling Function1. Printer Carriage Release Lever 4. Backing Paper2. Printer Front Panel 5. Label3. Backing Paper OpeningCAUTION: When removing the front panel, care must be taken not to damage the label takensensor harness.2. Feed the backing of the label stock between the front rubber roller and the Self-peeling roller just infront of it, as shown in Fig. 7-1.3. Feed the backing paper through the Backing Paper Opening in the front panel and replace the panelas shown in Fig. 7-2.1342345217-1 |
Related manuals for TEC TEC B-442
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine