4. PROGRAMMING OPERATIONS EO1-111484.14 Footer Message Programming (Submode 31)4-224.14 Footer Message Programming (Submode 31)A Footer message (max. 120 characters; 24 characters x 5 lines) to be printed on the footer portion ofreceipt can be programmed here.Anytime outside a saleControl Lock: SET31 [#/NS] |Line No.| [#/NS] Character entry [AT/TL] [#/NS]NOTE: Entering 2 digits of numeric code provides an alphanumeric character of Footer message.Therefore, odd number of numeric digit entry will cause an error. When less than 48 digitsof numeric data are entered, this ECR uses space code entry. If a Footer messageincludes spaces at the beginning, entering space code is required at the beginning of dataentry. For the Footer message, up to 24 regular-sized or 12 double-sized characters canbe entered. Also a combination of both types can be entered.Example) To program the following Footer message4.15 Function Key (Combination Key) Setting (Submode 34)A string of key opeartions can be set on each FUNCTION key ([FUNCTION 1] to [FUNCTION 10]).Using such programmed [FUNCTION] keys, the operator can eliminate time in various routineoperation procedures. (Up to 10 strokes of key operations can be set to each [FUNCTION] key.)Anytime outside a saleControl Lock: SET34 [#/NS] [FUNCTION] [KEY]………[KEY] [FUNCTION] [#/NS]OPERATIONCONDITION2 digits (01 to 05) Max. 24 characters(See NOTE below.)Repeat for other lines.Line No. 1Line No. 2Line No. 3Line No. 4Line No. 5B a r g a i n s a l e s o n e v e r yT u e s d a y .C o m e t o s a v e m o n e y !OPERATIONCONDITIONDepress one of the[FUNCTION] keys.(FUNCTION 1 toFUNCTION 10)Depress the keys to becontained in the key string.(Max. 10 strokes)Repeat for other FUNCTION keys.Depress the sameFUNCTION key thatwas depressed at thedeclaration.
