4. PROGRAMMING OPERATIONS EO1-111484.20 Manager Pass Code Programming (Submode 39)4-27Key Operation: Control Lock: SET, Enter 38 and depress the [#/NS] key.[0] [1] [#/NS] ([+] key)[5] [0] [AT/TL] (Preset Amount)[3] [AT/TL] (HALO digit)[1] [AT/TL] (Tax Status (Non-taxable))[0] [2] [#/NS] ([-] key)[1] [0] [0] [AT/TL] (Preset Amount)[4] [AT/TL] (HALO digit)[1] [AT/TL] (Tax Status (Non-taxable))[#/NS] (To complete this submode.)4.20 Manager Pass Code Programming (Submode 39)Manager Pass Code in Z mode or SET mode can be programmed here, which restricts the access to Z,and SET modes only for a manager.NOTE: Do not forget your Manager Pass code. When it is forgotten, there are no solutions andeven dealers can do nothing.Anytime outside a saleControl Lock: SET39 [#/NS] |Mode Code| [#/NS] |Pass Code| [AT/TL] [#/NS]NOTE: If you enter “0000”, the ECR is released from Pass Code System.Example) To program the following Manager Pass Codes.Pass Code in Z mode: 0101Pass Code in SET mode: 0202Key Operation: Control Lock: SET, Enter 39 and depress the [#/NS] key.[0] [1] [#/NS] (Z mode)[0] [1] [0] [1] [AT/TL] (Pass Code)[0] [2] [#/NS] (SET mode)[0] [2] [0] [2] [AT/TL] (Pass Code)[#/NS] (To complete this submode.)2 digits (01 or 02)01: Z mode02: SET mode4 digits(0000 to 9999)(See NOTE below.)Repeat for the other Pass Code.TEC STORE1343 PEACH DRIVEPHONE: 87-6437Open 8:00am to 7:00pmClosed: every Wednesday24-01-2002 #0000PRG 3801-01 0.50-02 3-03 102-01 1.00-02 4-03 10041 15:24TMTEC STORE1343 PEACH DRIVEPHONE: 87-6437Open 8:00am to 7:00pmClosed: every Wednesday24-01-2002 #0000PRG 3901-01 010102-01 02020042 15:24TMOPERATIONCONDITION
