Tait Orca 5010 Servicing Manual

Also see for Orca 5010: Service manual Service manual User guide

Contents

A - 4 Servicing Tait Orca 5000 handportables 09/01 IPN: M5000-00-102programming lead for connecting thecalibration test unit to a PC (TOPA-SV-012); DC service adaptor (TOPA-SV-005); SMA to N-type RF test lead for connectingto the radioís antenna connector (TOPA-SV-006); T6 driver bit and 8 mm socket (TOPA-SV-011); this manual; and TOP Programming Utilities (TPU) CD-ROM (IPN 406-00003-xx).Other items required for calibration but notincluded as part of the service kit are: RF communications test set (e.g. HP8920,MI2945/55, CMS52); digital current meter capable of measur-ing current up to 3 A, accurate to twodecimal places.; DC power supply, 7.5 V, 3 A for handport-ables; and TOPA-SV-A07 if calibrating TOP-Axxxx-xx 66 -88MHz product.Programming kitThe TOPA-SV-116 kit for programming TaitOrca 5000 radios contains: accessory connector to modular phonesocket programming cable for connectingthe radio to the programming lead(TOPA-SV-003); and 25 pin RS232 to modular phone jackprogramming lead for connecting theprogramming cable to a PC (TOPA-SV-012); and TOP Programming Utilities (TPU) CD-ROM (IPN 406-00003-xx).ConventionsThroughout this manual, the names ofsoftware screen, field and menu names arereferred to in bold sans serif font. Forexample:Check that the information in the Radio Modelfields (Specifications screen) is correct.