DraftTransportable Mobile Repeater User’s Guide Basic Operation 13© Copyright Tait International Limited March 2019charging, press the recessed button located at the left of the Charge LED toturn charging off and on.A DC input cable is supplied with the transportable for connection toexternal DC Supplies between 10 and 36 VDC.Notice When the transportable is not in use, always switch the bat-tery select switch to External DC/Battery Isolate.2.4 LED Indication Details2.4.1 Repeatera. after the four power-up sequences2.4.2 StatusThis LED is only lit when an AC supply is connected.2.4.3 ChargeThis LED is only lit when an AC supply is connected.LED Indication DetailsRepeater Power green repeater power is onAll LEDs/Alarm flashing power up sequence is in progressAlarm on repeater is in offline modeAlarm flashinga an alarm condition needs to be clearedReceive orange receiver is receivingTransmit orange transmitter is keyedLED Indication DetailsStatus green battery is fully charged or above 20%chargedStatus red, flashing battery is lowStatus off battery has been disconnected due tolow voltage