Tait TB8100 Installation Manual

Also see for TB8100: Installation and operation manual Operation manual User manual User manual User manual

Contents

Tait TB8100 Installation Manual Manual pdf 3 page image

TB8100 Installation Guide 3© Tait Electronics Limited February 2007Contents1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.1 Personal Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.2 Equipment Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51.3 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71.4 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81.5 Grounding and Lightning Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91.6 Recommended Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91.7 Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101.8 Installing the Base Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192.1 Auxiliary Power Supply Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192.2 RF Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212.3 System Control Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212.4 System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222.5 Service Kit Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292.6 12V PA Power Saving Control Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Associated DocumentationMBA-00001-xx TB8100 Specifications Manual.MBA-00005-xx TB8100 Installation and Operation Manual.MBA-00010-xx TB8100 Service Kit User’s Manual.MBA-00011-xx TB8100 Calibration Kit User’s Manual.MB8100-80-00-806 TB8100 Alarm Center User’s Manual.MBA-00013-xx TBA0STU/TBA0STP Calibration and Test Unit Operation ManualMBA-00016-xx TB8100 Service Manual.The characters xx represent the issue number of the documentation. All available TB8100 productdocumentation is provided on the Product CD supplied with the base station. Updates may alsobe published on the Tait Technical Support website (http://support.taitworld.com) .Tuning and ConfigurationIf your TB8100 base station has not been tuned to your requirements at the factory, you will needto tune the reciter modules before operating them in your radio system. To do this you will needto use the Calibration Kit software included on the Product CD, plus the Calibration and Test Unit.The TB8100 base station has been programmed with a default software configuration and defaultpasswords at the factory. You will need to use the Service Kit software to configure your base stationto suit the requirements of your radio system. Refer to the Calibration Kit and Service Kitdocumentation for full details on these procedures.