Tait TB8100 Installation Manual

Also see for TB8100: Installation and operation manual Operation manual User manual User manual User manual

Contents

Tait TB8100 Installation Manual Manual pdf 7 page image

TB8100 Installation Guide Installation 7© Tait Electronics Limited February 20073. Fit a surge suppressor to the antenna cabling where it enters thebuilding.4. Inspect all cables and equipment connected to the TB8100 basestation for defects.1.2.3 Equipment GroundingTo ensure safe operation the TB8100 base station equipment must becorrectly grounded as described in these installation instructions.1.2.4 Installation and Servicing PersonnelThe TB8100 base station should be installed and serviced only by qualifiedpersonnel.1.3 Regulatory Information1.3.1 Distress FrequenciesThe 406 to 406.1MHz frequency range is reserved worldwide for use byDistress Beacons. Do not program transmitters to operate in this frequencyrange.1.3.2 FCC Compliance 1This device complies with part 15 of the FCC Rules. Operation is subjectto the condition that this device does not cause harmful interference.1.3.3 Unauthorised ModificationsAny modifications you make to this equipment which are not authorised byTait Electronics Limited may invalidate your compliance authority’s approvalto operate the equipment.1.3.4 Health, Safety and Electromagnetic Compatibility in EuropeIn the European Community, radio and telecommunications equipment isregulated by Directive 1999/5/EC, also known as the Radio andTelecommunications Terminal Equipment (R&TTE) directive. The1. Refer to the TB8100 Specifications Manual (MBA-00001-xx) for more information on thecompliance standards to which the TB8100 base station equipment has been tested and approved.