144 Servicing Procedures TM9100 Service Manual© Tait Electronics Limited August 2005Task 8 —CheckError MessagesThe radio may display an error message. Carry out the corrective actionsdescribed in Table 6.1.Table 6.1 Error messagesError message Corrective actionError E0001UnknownTurn the radio off and then back on.Error E0002UnknownContinue with servicing tasks to locate the problem.Error E0003Corrupt FWRe-download the radio’s firmware.Error E0008System error0xabcdefghTurn the radio off and then back on. If the system error persists, download newradio firmware.To capture details of the system error, use CCTM command 204.Temperature thresholdexceededWait until the radio has cooled down.Cannot tx Go to Task 9 on page 145.Out of lock Go to “Frequency Synthesizer Fault Finding” on page 169.Programming mode,invalid radio ...Re-program the radio with a new programming database. If the problem persists,update or reload the radio’s firmware, and re-program the radio’s calibrationdatabase.
