Operating in conventional mode 1013 Proceed with your call.4 To turn repeater talkaround off, either change thechannel, or press the function key again.Receiving a callWhen there is valid activity on your radio’s currentlyselected channel or group, the radio then unmutesand you can hear the call.If an incoming call contains special signaling thatmatches the signaling programmed for your radio, theLED lights up green and your radio may give a ringingtone.Using the radio in differentrepeater areasYour radio may have a group of channelsprogrammed as a voting group. The channels in thevoting group all carry the same traffic, but fromdifferent repeaters. As your radio moves in and out ofdifferent repeater coverage areas, the bestcommunication channel is automatically selected foryou to use.This channel is known as the ‘home’ channel, and willbe the channel you make and receive calls on. Whilevoting is active, the scanning icon appears on thedisplay.The section "Selecting a scan or voting group" onpage 72 explains how to select a group. A group canbe either a voting or a scanning group.Suspending a channel from a voting groupYou may be able to use the function key programmedfor nuisance delete to temporarily delete one of thechannels from the voting group.