Tait tm9100 p25 Installation Manual

Also see for TM9100 Series P25: User guide

Tait tm9100 p25 Installation Manual Manual pdf 20 page image

20 Installing the Radio TM8100/TM8200 Installation Guide© Tait Limited October 2012Notice Do not install the fuses until the installation is ready to bechecked. For more information, refer to "Checking the Installation" onpage 28.5. Insert each end of the negative wire into each of the fusecrimp-terminals and crimp them to force the metal contacts ontothe wires.6. Push the two crimp-terminals into the clear plastic fuse cover. Closethe cover while the next steps are completed.7. Repeat steps 5 and 6 for the positive wire.8. Connect the negative wire to the battery ground terminal.9. Connect the positive wire to the battery positive terminal.Notice Do not install the fuses until the installation is ready to bechecked. For more information, refer to "Checking the Installation" onpage 28.3.6 Connecting a Remote SpeakerIf a high-power remote speaker isrequired, Tait recommends using:■ TMAA10-06 high-power remotespeaker for >25W radios■ TMAA10-03 high-power remotespeaker for 25W radiosThe remote speaker is installed inparallel with the radio’s existinginternal speaker. It can be installed atsome distance from the radio, or it canbe used to increase the volume of the audio from the radio’s existing internalspeaker.If a different speaker is used, receptacles for the speaker pins of the powerconnector are provided with the installation kit.■ Connect the speaker to pins 2 (SPK–) and 3 (SPK+) of the powerconnector described on page 18.For more information, refer to the installation instructions provided withthe speaker, or to the relevant section of the service manual.>25W 25W