Takara Belmont Yume Oasis Installation Instructions Manual
                                    |
■ Carrying The BasinUnpack the wood frame.Remove the resin case (blue).This work should always be done by two people.The basin body may fall over if it is not supported when the bolt is removed.CAUTIONWhen the upper unit is carried● Never hold the stepped part under the basin or the main body cover.Doing so may cause damage to the main body cover.● Take care when handling the basin as it is heavy and fragile.● Remove all metallic objects such as watches when carrying the basin.If watches or belts are rubbing against basin, the basin may have a scar.● Take extra care to ensure not to damage the covers.● Do not touch the basin body pipes.Doing so may cause water leaks.The upper unit main has casters.It can automatically roll down an incline or a slope.Make sure to place it on a level floor surface.The basin is unstable when it is not fixed to the floor.Pay full attention to turnover.18Attachment of lidAttach the lid to the floor unit and then tighten the screwfor fastening lid with a straight slot screwdriver.The screw for fastening lid canbe tightened with a coin, etc.LidScrew for fastening lidBumperBasinStraight slot screwdriver○ Hold the top end of the basin and the bottom of the bumper as shown in theimage on the right hand when the unit is carried.○ Carry the unit without removing the air mat mounted on the basin and the filmtapes attached on the main body cover.○ Do not hold the stepped part under the basin or the main body cover.Make sure to carry it by two people. (See the image on the right hand.)CAUTIONCAUTION４ Carrying The Upper Unit |
Related manuals for Takara Belmont Yume Oasis
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine