Takara Belmont Yume Oasis Installation Instructions Manual
                                    |
■ Attachment Of The Surface Water Travel Prevention Cloth To The Shower HoseCAUTION2. Align the height of the neck core andneck cushion ends (both ends).Fix the hook light pulling the neck cushion on theunder surface of neck core.1. Align the neck cushion to the center ofneck core as the below.Check the direction of the neck cushion-and neck core.Wrap the cloth at the lowest face of the shower hosewith the hook-and-loop fastener facing upward as shown in the right image.3. Fix the neck core to the neck base and attach.Take note of the direction to fix the neck core.Top ViewBasin side Basin sideSeat side Seat sideSide Wash BasinThe slit on theneck cushionshould face the seat side.Neck coreFasten the hookat the bottom surfaceof the neck coreHookAlign the heightAlign the heightNeck cushionNeck coreThe slit on the neck cushionshould face the seat side .Align the center.Neck baseSeat sideBasin sideSurface water travel prevention clothHook-and-loop fastener sideLowest face of the hose28Do not force the neck cushion if it does not fit smoothly.Instead, check the following points.Forcing the neck core on may cause damage to the neck base or injury to customers.● Check the neck core insert the direction.● If the neck cushion is loose, check the direction of the neck cushion toward the neck core.● If the neck core dowel hole is clogged with dirt, clean and remove the dirt before use.The slit on theneck cushionshould face theseat side . |
Related manuals for Takara Belmont Yume Oasis
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine