TallyGenicom 9050N Quick Start Manual

Also see for 9050N -: Brochure & specs Specifications Datasheet User manual

Contents

TallyGenicom 9050N Quick Start Manual Manual pdf 12 page image

Chapter 2 Setting Up Your PrinterQuick Start Guide8Preparing a Location for the PrinterDimensions z Printer Height: 498 mm (19.6 in)z Printer Width (left to right): 640 mm (25.2 in)z Printer Depth (front to back): 525 mm (20.7 in)InstallationPrecautionsBefore unpacking your laser printer, it is recommended that you read thefollowing to assist in locating a suitable spot for your new laser printer. To makeoptimum use of the printer, observe the following precautions when locating theprinter.The installation surface must be stable and very sturdy to support the considerable weight of theprinter. If the printer falls over, there is a severe risk of injuries.z Always keep the printer under the following conditions:Temperature: 5 to 35º C (41º to 95º F)Humidity: 15 to 85% (non-condensation)z Be sure to keep the temperature below 28º C (82º F) if the humidity is 85%. Ifthe temperature changes drastically from a cold environment to a warm envi-ronment, condensation may develop inside the printer and cause print prob-lems. Therefore, be sure to let the printer rest for some time to adjust to thenew temperature.z Do not subject the printer to direct sunlight or a malfunction may result.z Do not place the printer in a location with poor ventilation, or high level ofdust, otherwise a fire hazard or electric shock may result.z Do not place the printer near heaters or similar objects, otherwise a fire hazardmay result.z Never block the ventilation openings of the printer, otherwise the internal tem-perature will build up and cause a fire hazard.z Do not place the printer near alcohol, benzine, or other volatile and flammablematerials, or a fire hazard may result.STOP