Now press the < or > key repeatedly until Load Menu=3 appears. Thenselect menu no. 3 as the current setting using the Set key. After youhave completed this change the printer initialises itself and a correspond-ing message is displayed in the LC display.The currently active setting is marked with an asterisk (*).If changing menues it is possible that the printer initializes due todifferent emulation settings.ä Menu handling You move from menu item to menu item using the four function and se-lection keys underneath the LC display. Every function and everyparameter displayed on the LC display is effected/selected by the keydirectly underneath. For this reason the function and selection keys arereferred to in this manual by their current assignment. Generally twoparameter groups occupy one level (in the following picture theparameter groups LPI and Skip occupy one level).If you do not wish to change one of the two parameters you can eitherpress the Next key (to access the two following parameter groups in themenu), or you can press the Back key (to access the two previousparameter groups in the menu).Load Menu=1 *Set Exit OnlineSetup21 3 4BACK QUIT?PRINTReference manual The Menu48