Parameter group Parameter DescriptionLanguage English*GermanFrenchItalianSpanishThe menu can be shown in five languages on the LC display.Paper SingleTract1ASF-RASF-FTrac2Trac3FormlenLines6:72*:132Sets the form length via line formats.Please note that the adjustment in Lines depends on the selected LPI. Forexample 8 LPI at a selected line number of 96 lines results in a formlength of12 inches (96 lines/[8lines/inch]) = 12 inches).The adjustable range is from 1 to 22 inch, i.e. with 2LPI, from 2 to 44 linesand with 12 LPI, from 12 to 264 lines.If the form length is set it will not be changed by changing the LPI later on.The adjustable range may also be set outside the specification ofthe paper path used (see Technical Data,Paper Specifications, or, ifyou use an optional tractor or ASF, the correspondingpaper specifi-cations). However, any settings outside of these specifications areyour own responsibility, and proper function is not guaranteed.BACK QUIT?PRINTReference manual The Menu62Selects the paper parameters Formlen, FormAdj and Head (only if AGA =Off!) separately for each paper source in the current menu (1 to 3).
