T&D RTR-57U User Manual
Also see for RTR-57U: User manual
                                                                    | |
Contents
| 
41MonitoringThe RTR-57U can be set to patrol and monitor RTR-51A/52A/52Pt/53A or RVR-52A groups and display in order the current readingsfor view.1. In the Main Menu, open [ MONITOR MODE].2. Select the monitoring range.3. Select and set the Monitoring Interval.Select themonitoring rangeSet the monitoring interval4.By selecting the monitoring range and clicking, the monitoring searchwill begin.- If using [Specify Group], by specifying the group and clicking, themonitoring search will begin.5. After the search has been completed, the current measurementreadings for those remotes registered in the group(s) will beconsecutively displayed.- For RTR-53, the display will be in the order of temp / humidity.- If the buzzer has been set to ON and a result is not good, a beepingsound will go off.[All Groups] :Remote Units in all groups registered to the RTR-57U will be contactedvia wireless communication, and current measurement readings forthose units with which communication is possible will be displayedconsecutively every 2 seconds.[Specify Group] :All Remote Units in the selected groups will be contacted via wirelesscommunication, and current measurement readings for those units willbe displayed consecutively every 2 seconds.For those units with which communication is impossible the measurement |
Related manuals for T&D RTR-57U
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine