Setting the Clock andMinute Timer(some models): Flashing indicatesMinute Timer modeYour model may be equipped with the clock shown below. Follow theinstructions to set the clock and minute timer on your range.To Set the ClockWhen the range isfirst plugged in, or when the power supply to the range hasbeen interrupted, "12:00" will flash in the display window.1. Push _.until the correct time appears2. Push in and hold _ or in thedisplay.Advances time, _ reversestime.To Set the Minute Timer1. Push _er. "0:00"will appear in the display window. The timer can be setfor any amount of time from 00:01 minute to 12:00 hours,2. Push in and hold _ until the correct amount of time appears in thedisplay. _ Advances time.... _ reverses time. The minute timer willautomatically start when the button is released. The ":" will flash toindicate Minute Timer mode,3. When the set time haspassed,the controlwill display'0:00" and beep threetimes. The timer will continue to beep until :_ is pressed.4. Push _JC to canoe the timer and return to the clock mode.