Tappan TGF365CHTB Owner's Manual

Contents

Tappan TGF365CHTB Owner's Manual Manual pdf 8 page image

Setting Warmer DrawerControls(if equipped)IprightPositionDownwardPositionOFFHILOOWarmer Drawer RecommendedFood Settings ChartFood Item SettingRoasts (Beef, Pork, Lamb) MEDPork Chops HIBacon HIHamburger Patties HIPoultry HIGravies MEDCasseroles MEDEggs MEDFried Foods HIVegetables MEDPizza HIBiscuits MEDRolls, soft LORolls, hard MEDPastries MEDEmpty Dinner Plates LOArranging Warmer Drawer Rack PositionsSet the warmer drawer rack in the vertical position as shown below.The rack can be used in 2 ways:In the upright position to allow low profile food items to be placed bothunder and on top of the rack (for example, rolls or biscuits on top of therack and a casseroledish under).• In the downward position to allow you to place light weight food itemsand empty dishware (for example, rolls or pastries and dinner plates).To Operate the Warmer DrawerYour range is equipped with a warmer drawer. The purpose of the warmerdrawer is to keep hot cooked foods at serving temperature. Use the warmerdrawer to keep hot foods hot such as: vegetables, gravies, meats, casseroles,biscuits and rolls, pastries and heated dinner plates. Always start with hotfood. It is not recommended to heat cold food in the warmer drawer.The warmer drawer is equipped with a catch which may require extra forcewhen opening and closing the drawer.All food placed in the warmer drawer should becovered with a lid or aluminumfoil to maintain quality. Do not use plastic wrap to cover food. Plastic maymelt onto the drawer and be very difficult to clean.Use only dishware, utensils and cookware recommended for oven use in thewarmer drawer.Always use potholders or oven mitts when removing food fromthe warmer drawer as cookware and plates will be hot.Indicator LightThe indicator light is located below the thermostat control. It turns on whenthe control is set, and stays on until the control is turned off. The warmerdrawer is inoperable during the self-clean cycle. The indicator light will notcome on during the self-clean cycle.To Set the Thermostat ControlThe thermostat control is used to select the tern peratu re of t he warmer drawer.It is located on the control panel. To set the thermostat, push in and turn theknob to the desired setting. The temperatures are approximate, and aredesignated by HI, MED and LO.1. Select the temperature setting.2. For best results, preheat the drawer before adding food. An empty drawerwill preheat in approximately 15 minutes.3. When done, turn the thermostat control to OFF.Temperature SelectionRefer to the chart in the side column for recommended settings. If a particularfood is not listed, start with the medium setting. If more crispness is desired,remove the lid or aluminum foil.Most foods can be kept at serving temperatures by using the medium setting.When a combination of foods are to be kept warm (for instance, a meat with2 vegetables and rolls), use the high setting.Refrain from opening the warmer drawer while in useto eliminate lossof heatfrom the drawer.