34Operation with DVD and Video CD (Continued)Changing the Audio ChannelWith a Video CD, press AUDIO then press b / Brepeatedly during playback to hear a different audiochannel (STEREO, LEFT or RIGHT).With DVD-RW discs recorded in VR mode that haveboth a main and a Bilingual audio channel, you canswitch between Main (L), Bilingual (R), or a mix of both(Main + Bilingual) by pressing AUDIO.3D SurroundThis unit can produce a 3D Surround effect, whichsimulates multi-channel audio playback from twoconventional stereo speakers, instead of the five ormore speakers normally required to listen to multi-channel audio from a home theater system.1 Press DISPLAY twice then use v / V to select thesound icon. Then, use b / B to select “3D SUR.”.2 To turn off the 3D Surround effect, select “NORMAL”.SubtitlesPress SUBTITLE then press b / B repeatedly duringplayback to see the different subtitle languages.Finding Locations on a DiscYou can directly access any point on a video CD usingthis function. Use this function only while a video CD isplaying. Playback jumps to the point specified.1 Press SEARCH during playback.The progress bar appears on the TV screen.2 Use b / B to find a start position for playback.3 Press ENTER to confirm the selected position.Playback starts from the selected position.oteThis function works only when no marker is memorized.Last Condition MemoryThis recorder memorizes the user settings for the lastdisc that you have viewed. Settings remain in memoryeven if you remove the disc from the recorder or switchoff the recorder. If you load a disc that had its settingsmemorized, the latest stop position is automaticallyrecalled.otes– Settings are stored in memory for use any time.– This recorder does not memorize settings of a disc ifyou switch off the recorder before commencing toplay it.DVDVCDDivXDVDDivXVCD+R+RWVRVideoDVDDivX+R+RWVRVideoVCD