Targus PAEPR090U User Manual
                  | |
Contents
| 
9Targus Mobile Port StationTo verify the COM port setting on your PDA, refer to thedocumentation that came with it.Connecting a Parallel PrinterThe logical port for a parallel printer on the Mobile PortStation is either LPT2 for the Windows® Me operatingsystem, USB001 for the Windows ® 2000 operatingsystem or USB Printing Support for the Windows ® XPoperating system. If the logical port on your computer is setto LPT1, or LPT1 is the only option when setting up a newprinter, you must change it so that your operating systemrecognizes the printer via the Mobile Port Station.Connecting and Configuring a Printer for the FirstTime1 Attach the cable connector to the parallel port on theMobile Port Station.2 Install the printer software driver according to theinstructions that come with the device.3 When prompted to select a port choose either LPT2,USB001 or USB Printing Support. If this port does notappear in the list, choose the LPT1 port, complete themanufacturer’s setup for your printer and follow theinstructions below to redirect your printer.Checking and Redirecting the Printer Port SettingsFollow these instructions to check the printer port settingsand redirect your printer from the LPT1 port to either LPT2,USB001 or USB Printing Support on the Mobile PortStation.1 Unplug the printer cable from your computer and plug itinto the Mobile Port Station parallel port. |
Related manuals for Targus PAEPR090U
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine