Rear panel4 TASCAM 788 Brief Guideb REPEAT key and indicator Used to setand show the status of repeat playback and recording,as well as to set the gap between repeats.c JOG indicator Lights when jog (trim) modeis in operation, as set by the STOP+PLAY key combi-nation.d PITCH/SSA key and indicator Used toset and display the status of varispeed (pitch control)as well as the SSA (Slow Speed Audition) function.e ENTER/YES key Used to “go down a level”in the menu system, to confirm settings, or to give apositive answer to questions asked by the 788.f EXIT/NO key Used to “go up a level” in themenu system, to exit without making settings, or togive a negative answer to questions asked by the 788.g REW key Used to move the playback positionbackwards in the song. Also used with STOP tolocate to the zero point.h F FWD key Used to move the playback posi-tion forwards in the song. Also used with STOP tolocate to the last recording position.i STOP key Stops playback, recording or“winding”. Used with PLAY for jog mode.j PLAY key Starts playback. Uses withRECORD for recording.k RECORD key Use with PLAY for recording.l Cursor keys Used to navigate around menuand parameter setting screens to highlight parame-ters, options, etc.Rear panelm PHONES jack Used with standard stereoheadphones (1/4” jack).n REMOTE jack 1/4” jack used with a foot-switch such as the TASCAM RC-30P for hands-freepunch operations.o AUX OUTPUT jacks Output unbalancedsignals from the Aux loop at –10 dBV. Connect to theL output only for mono.p MONITOR OUTPUT jacks Output theselected monitor signals. RCA (phono) jacks at alevel of –10 dBV.q STEREO OUTPUT jacks Output themixed stereo signals. RCA (phono) jacks at a level of–10 dBV.r AUX INPUT jacks Accept –10 dBV unbal-anced signals (1/4” jacks) to the Aux input channelsfor assignment to mixer channels or the sub-mixer.s MIC/GUITAR switch Switches the inputimpedance of INPUT D between MIC/LINE (MIC)and a value suitable for electric guitars, basses, etc.(GUITAR).t INPUTS A through D Accept –50 dBu to+4 dBu balanced signals. Use the supplied XLR-to-phone convertors to connect XLR-equipped sources.u DIGITAL OUTPUT Outputs the mixed ste-reo signals in digital audio IEC60958 TYPE II(SPDIF) format from a coaxial RCA connector.v SCSI connector SCSI-2 connector for con-nection of external storage devices, CD-R drives, etc.w MIDI IN and OUT Accept and transmitMIDI information as described in the manuals.x POWER IN Connect this only to a PS-P788power supply unit where the voltage requirementsmatch your local power supply.y POWER switch Press to turn on, and pressagain to turn off after shutting down the 788 usingthe EJECT/SHUT key F as described in themanuals.TEAC CORPORATIONPhone: (0422) 52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japanu v w x yn o p q r tm sPrinted in Taiwan MA-0407