Tascam BB-800 Owner's Manual

Also see for BB-1000CD: Owner's manual Technical information Release notes

Contents

TASCAM BB-1000CD/BB-800 215 Use the CURSOR [§/¶] keys to select the EXT > SPitem.6 Set it to ON to output the external microphonesounds from the speakers. Set it to OFF to disablethe speakers.TIPWhen the speakers are set to output sounds input fromthe external microphones, feedback could occur. Whenrecording with external microphones, we recommendthat you disable the speakers and use headphones tomonitor the input from external microphones.Recording with line inputs1 Press the INPUT key to open the INPUT screen.2 Use the CURSOR [§/¶] keys to select the SOURCEitem.3 Use the DATA wheel to select FRNT/LINE or EXT/LINE.When set to FRNT/LINE, the line inputs and theunit’s front microphones can be used simultane-ously.When set to EXT/LINE, signals from the line inputsand external microphones can be used simultane-ously.4 Use the REAR MIC/LINE knob to adjust the line inputrecording level.To record signals input through the front micro-phones or external microphones at the same time,use the FRONT MIC/EXT MIC knob to adjust thefront microphone or external microphone record-ing level. Turn the FRONT MIC/EXT MIC knob all theway to the left (MIN) to record sounds only from theline inputs.Setting the recording file formatRecording to an SD cardThe four recording file formats that can be selected are MP3(low), MP3 (normal), MP3 (high) and WAV, with the soundquality increasing in that order. As sound quality increases,however, so does file size, reducing the amount of time thatcan be recorded. (See the following section for details.)1 Press the STOP key to stop the unit.2 Press the HOME key to open the Home screen.3 Press the MENU key to open the MENU screen.4 Use the DATA wheel or CURSOR [§/¶] keys to selectREC SETTING, and press the ENTER key.4 – Recording