Tascam CD-DJ1 Owner's Manual

Tascam CD-DJ1 Owner's Manual Manual pdf 3 page image

IMPORTANT SAFETY INSTRUCTIONSTASCAM CD-DJ1 1 Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this apparatus near water.6 Clean only with dry cloth.7 Do not block any ventilation openings.Install in accordance with the manufactur-er's instructions.8 Do not install near any heat sources suchas radiators, heat registers, stoves, or otherapparatus (including amplifiers) that pro-duce heat.9 Do not defeat the safety purpose of thepolarized or grounding-type plug. A polar-ized plug has two blades with one widerthan the other. A grounding type plug hastwo blades and a third grounding prong.The wide blade or the third prong are pro-vided for your safety. If the provided plugdoes not fit into your outlet, consult anelectrician for replacement of the obsoleteoutlet.10 Protect the power cord from being walkedon or pinched particularly at plugs, conve-nience receptacles, and the point wherethey exit from the apparatus.11 Only use attachments/accessories speci-fied by the manufacturer.12 Use only with the cart, stand, tripod, brack-et, or table specified by the manufacturer,or sold with the apparatus. When a cart isused, use caution when moving the cart/apparatus combination to avoid injury fromtip-over.13 Unplug this apparatus during lightningstorms or when unused for long periods oftime.14 Refer all ser vicing to qualified ser vicepersonnel. Servicing is required when theapparatus has been damaged in any way,such as power-supply cord or plug is dam-aged, liquid has been spilled or objectshave fallen into the apparatus, the appara-tus has been exposed to rain or moisture,does not operate normally, or has beendropped.• Do not expose this apparatus to drips orsplashes.• Do not place any objects filled with liquids,such as vases, on the apparatus.• Do not install this apparatus in a confinedspace such as a bookcase or similar unit.• The apparatus draws nominal non-oper-ating power from the AC outlet with itsPOWER switch in the off position.• The apparatus should be located closeenough to the AC outlet so that you caneasily grasp the power cord plug at anytime.• An apparatus with Class I constructionshall be connected to an AC outlet with aprotective grounding connection.