Tascam CD-GT2 Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS11 TASCAM CD-GT2Quick Start Guide—Basic OperationLet’s start using the unit right away. In this section, we willteach you the basics, including how to setup the unit, playa CD, connect your guitar and play along with prerecordedmusic.PreparationTurn the power onRemove the battery case cover from the underside of the unit,and insert four ordinary AA batteries, aligning them with the+ and – symbols inside the case. (See “Batteries” on page 10.)Turn the power ON after inserting the batteries.Press and hold the POWER switch on the rear of the unit forabout one second. Release it when “TASCAM” appears on thedisplay. Start-up completes after a few seconds and the TIMEDISPLAY screen appears.NOTEYou can also use a PS-P520 AC adapter (sold separately)for power instead of batteries. Connect the AC adapter tothe DC IN 5V jack on the rear of the unit.Setting a CDAll the controls for this device are on the CD tray cover.The OPEN switch is on the front of the unit. Slide it left andopen the tray cover. Put a CD in the CD tray and press it intoplace gently until the disc clicks. Close the tray cover aftersetting the CD.NOTEThe keys cannot be used when the tray cover is open.