Tascam DA-40 Owner's Manual

Also see for DA-40: Tehnical documentation

Tascam DA-40 Owner's Manual Manual pdf 30 page image

30 TASCAM DA-406 - Specifications6.1 Audio specifications6.2 I/O specifications6.3 Physical specificationsChanges to specifications and features may be madewithout notice or obligaiton.Tape Speed 8.15 mm/s (SP mode)4.075 mm/s (LP mode)Recording time (with 120-minute cassette)120 minutes (SP mode)240 minutes (LP mode)Head drum speed 2,000 rpm (SP mode)1,000 rpm (LP mode)Fast wind time (forwardand rewind)60 seconds end-to-end with120-minute tapeSampling frequency 44.1 kHz, 48 kHz32 kHz (LP mode)Recording resolution 16-bit linear (SP mode)12-bit non-linear (LP mode)Frequency response±0.5 dB20 Hz to 20,000 Hz (SP mode)20 Hz to 14,500 Hz (LP mode)S/N ratio > 92 dBDynamic range >93 dBTotal harmonic distortion(1 kHz @ FS – 0.1 dB)<0.005% (SP mode)<0.075% (LP mode)Channel separation >90 dB (1kHz @ FS)Wow and flutter Unmeasurable (<0.001%)Analog inputs (balancedXLR-3-31 type)Nominal input level +4dBu(FS=–16 dBu)Maximum input level +20 dBuNominal impedance >10 kΩAnalog inputs (unbal-anced RCA)Nominal input level –10dBVMaximum input level +6 dBV(2Vrms)Nominal impedance >50 kΩAnalog outputs (balancedXLR-3-32 type)Nominal output level +4dBu(FS=–16 dBu)Maximum output level +20 dBuNominal impedance <100 ΩAnalog outputs (unbal-anced RCA)Nominal output level –10 dBVMaximum output level +6 dBV(2 Vrms)Nominal impedance <1k ΩHeadphone 1/4-inchstereo jack(2 x 50 mW into 32 Ω)Digital input AES/EBU(balanced XLR-3-31 type)AES3-1992 (Type I) a orIEC60958 format (Type II)(auto-detect)Digital input COAXIAL(unbalanced RCA)AES3-1992 (Type I)a orIEC60958 format (Type II)(auto-detect)Digital output AES/EBU(balanced XLR-3-32 type)AES3-1992 (Type I)a orIEC60958 format (Type II)(menu-selectable)Digital output COAXIAL(unbalanced RCA)AES3-1992 (Type I)a orIEC60958 format (Type II)(menu-selectable)Parallel I/O port 15-pin ’D’-sub connectorREMOTE CONTROL3.5 mm mini-jackFor use with RC-D45 onlya. IEC-60958 Type I (AES3-1992) is a standardfor broadcasting studios (professional). It can-not be used for connecting consumer products.IEC-60958 Type II (SPDIF) is a standard forconsumer products.Voltage requirements: USA/Canada 120 VAC ‘60 HzEurope/UK 230 VAC @ 50 HzAustralia 240 VAC @ 50 HzPower consumption 21 WWeight 8 kg (17.6 lbs)Dimensions (w x h x d) 482 x 150.5 x 364 mm (19 x 5.9x 14.3 inSupplied accessories Rack mounting kitOptional accessories RC-D45 wired remote controlunit