Tascam DA-98 Setup Manual
Also see for DA-88: Owner's manualOwner's manualSupplemental sheetOwner's manualOwner's manual
            | |
Spirit Digital 328 v22Connect audio connections as shown in the diagram below. A Tascam TDIF cable must beconnected from the TDIF port of the DTRS machine to the TDIF Port A of the 328.The TDIF connection allows two way digital transfer between the 328 and the Tascam DTRS.The outputs of the 328 can be configured to be either direct outputs for input channels 1-8 to theDTRS, or the Digital 328’s 8 Group outputs.Besides the audio connections, a BNC Wordclock cable must be connected from the 328Wordclock Out to the DTRS Wordsync Input to synchronize the transmission of the samples.328 TDIF 1 Î DA-88 TDIF PortTascam DA-88Digital 3281 Connecting The SystemConnecting The SystemConnecting The SystemConnecting The SystemAudio ConnectionsAudio ConnectionsAudio ConnectionsAudio ConnectionsSynchronization ConnectionsSynchronization ConnectionsSynchronization ConnectionsSynchronization ConnectionsIf MIDI Timecode (MTC) and MIDI Machine Control (MMC) are to beused to transmit timecode, transport controls and record arming, it isessential that and SY-88 board is fitted to the DA-88. A MIDI cablemust be connected from the 328 MIDI Out to the SY-88 MIDI In and aMIDI cable must be connected from the SY-88 MIDI Out to the 328MIDI In.NOTE |
Related manuals for Tascam DA-88
manualsdatabase
Your AI-powered manual search engine