Spirit Digital 328 v24In a configuration using one or two DTRS machines, the 328 must be made to be the WordclockMaster device. Enter the 328 Menu pages by pressing the button on the right handside of the LCD display. Using the encoder beneath the display, scroll up or down until the ‘ClockSource Sel’ menu is highlighted, and press . Here, either the internal sampling ratecan be toggled between 44.1kHz and 48kHz, depending on which is required. Use the encoderto toggle the clock rate, press to set the sample rate and to return to themenu pages.To ensure that the Digital 328 Tape Port A is set to TDIF, enter the 328 Menu pages by pressingthe button on the right hand side of the LCD display. Using the encoder beneath thedisplay, scroll up or down until the ‘Tape Port Select’ menu is highlighted. Press andkeep pressing the Up cursor arrow until the ‘’ menu page is displayed. Usingthe encoder, set the Bank Source to TDIF. Press the Down cursor arrow once, to set thewordlength. The Wordlength required for all DA machines is 16 bit. The wordlength is set onthe 328 with the encoder. Press to set the wordlength and to return tothe menu pages.To configure the 328 to send the MMC controls to the DTRS and vice versa, the DTRS optionmust be selected in the Tape Machine Setup menu. Enter the Menu pages by pressing the button, and scroll up or down with the encoder until the ‘Tape Mach Setup’ menu ishighlighted. Press , scroll until ‘Tascam DTRS’ is highlighted and press again.Internal:44.1kHzInternal:48.0kHz24 >Bank Source:TDIForape Ch17->24 >Wordlength: 162 Digital 328 SetupDigital 328 SetupDigital 328 SetupDigital 328 SetupWordclockWordclockWordclockWordclockTape PortsTape PortsTape PortsTape PortsMIDIMIDIMIDIMIDI
