18 TASCAM DP-008EX2–Quick Start Guides5. Return to the beginning of the song(00h00m00s00f ) and press the Play (7) buttonto begin playback of the recording on TRACK 1.Play the lead guitar part along with the alreadyrecorded rhythm guitar.You can hear both TRACK 1 playing back andthe sound of the input guitar through theheadphones.6. As necessary, use the TRACK 1 and 2 LEVEL andPAN knobs, the MASTER LEVEL knob and theVOLUME dial on the back of the unit to adjustthe monitoring levels and balance.7. When you are finished checking, press the Stop(8) button to stop playback.8. Return to the beginning of the song(00h00m00s00f ) and press the Play (7) buttonwhile pressing and holding the Record (0)button to begin recording. Play the lead guitarpart.The Record (0) indicator lights and the TRACK 2REC indicator stops blinking and stays lit.9. When you are finished playing, press the Stop (8)button to stop recording.10. Press the TRACK 2 REC button to turn its RECindicator off.NOTEIf the indicator continues to light even when theTRIM knob is turned down, the guitar signal itselfis too loud. In this case, if the input source is set toExt. Input/High, change it to Ext. Input/Mid or Ext.Input, LINE/Low. If the inputsource is set to Ext. Input/Mid, change it toExt. Input, LINE/Low. If the OL indicatorlights even when set to Ext. Input, LINE/Low, lower the volume output from the guitar.Record vocals on TRACK 31. Press the ASSIGN button to open the INPUTASSIGN screen.2. Press the TRACK 3 REC button to set the TRACK3 SOURCEto B.3. Press the HOME button to return to the HomeScreen.
