TASCAM DP-24 1DP-24 Release NotesD01174200BNoticeAlways use the most recent firmware for this device.Please visit the TASCAM web site (http://tascam.com) tocheck for the latest firmware.Maintenance itemsV1.02 changesSome WAV format files were not recognized. This has• been fixed.When MMC mode was set to• SLAVE, MMC RECcommands were not always received. This has beenfixed.When the MIDI GENERATOR was set to• MTC,synchronization was sometimes lost. The stability ofMTC GENERATOR output has been improved.Playback could become unstable after recording a 24-• bit, 44.1kHz song using punch-in and punch-out. Thishas been fixed.When using CD Writer to change song order,• sometimes canceling a change would not be reflectedcorrectly in the track order. This has been fixed.The REMAIN indicator shown in• Mixdown andMastering modes is now calculated for recordingstereo WAV Files.Waveforms were not always displayed correctly when• zoomed in or out. This has been fixed.Values shown in the EQ pop-up were sometimes• incorrect. This has been fixed.On the• MIXER screen, more effects could be addedthen are supported by the unit. This has been fixed.In addition, other improvements to operation stability• have been made.Checking the firmware versionCheck the firmware version of your DP-24 beforeconducting a firmware update.1. Turn the unit's power ON.2. Press the MENU button to open the MENU screen.3. Use the JOG/DATA dial or CURSOR (5/b/g/t) buttons to select the INFORMATION menu(selected item appears green), and press the F4 (t)button to open the INFORMATION screen.You do not need to update the unit’s firmware if theSYSTEM VERSION shown here is the same as ornewer than the version that you intend to use for theupdate.