Tascam DR-701D Owner's Manual

Also see for DR-701D: Reference manual Manual Owner's manual

16 TASCAM DR-701DCategory Desired action Function name Procedures, buttons used and explanationUnit settingsSet the date andtimeHome Screen w MENU w SYSTEM w DATE/TIMEUse this function to set the internal clock, which is used for the recordingdates written to files, for example.Turn plug-inpower onHome Screen w MENU w MIC POWERw PLUGINMake this setting when using an external mic that requires plug-in powerconnected to the EXT IN 1/2 jack.Check informationabout the unitor cardHome Screen w MENU w SYSTEM w INFORMATIONUse this function to check the unit firmware version and the remainingspace on the card, for example.Change theautomatic powersaving functionAutomatic powersavingHome Screen w MENU w POWER MANAGEMENTw AUTO PWRSAVEThis function automatically turns the unit off when it is not used for sometime.Change thebacklight settingHome Screen w MENU w POWER MANAGEMENTw BACKLIGHTUse this to change the display backlight setting.Adjust the displaycontrastTurn the DATA dial while pressing MENU.Use this to set the contrast of the characters on the display.Set the batterytypeHome Screen w MENU w POWER MANAGEMENTw BATTERYSelect the type of battery being used. This setting affects the accuracy ofthe remaining battery display.Set the phantompower voltageHome Screen w MENU w MIC POWERw VOLTAGESets the phantom power voltage.Restore the unit toits default settings Initialize Home Screen w MENU w SYSTEM w INITIALIZEUse this function to restore all settings to their factory defaults.Format an SD card Format Home Screen w MENU w MEDIA w FORMATUse this function to format cards.Set the file nameformatHome Screen w MENU w FILE w NAME TYPEYou can change the characters used in automatically-assigned file names.Link multiple trimcontrols Gang Home Screen w MENU w GANG w GRP1 or GRP2You can group channels to link their operation.Add audio inputthrough the unitto the HDMI audiooutput.Home Screen w MENU w HDMI AUDIO ASSIGNw SEL or MIXThis replaces the audio of the selected channel.Change thetimecode sourceto HDMIHome Screen w MENU w TIME CODEw SELECTUse this to select the input timecode source.Make timecodegenerator runeven when unitis offHome Screen w MENU w TIME CODEw POWER OFF GENUse this to make the timecode generator continue running even when theunit is off.Check remainingbattery chargewhen operatingon USB powerHome Screen w MENU w SYSTEM w INFORMATION w SYSTEM(3/3)Check the remaining battery charge with the AA BAT. LEVELitemDo not mutewhen trim turneddown completelyHome Screen w MENU w METER/TRIM w TRIM MINSet whether or not to mute when a trim is turned down completely.Set the peak holdtimeHome Screen w MENU w METER/TRIM w PEAK HOLDUse this to change the peak hold time.Adjust the levelsof this unit andconnectedequipmentOscillator Home Screen w MENU w SLATE TONEw OSCILLATORUse this to output a signal at the set level.