Tascam DR-70D Reference Manual

Also see for DR-70D: Owner's manual Release notes

Tascam DR-70D Reference Manual Manual pdf 14 page image

14 TASCAM DR-70D3 – PreparationSetting the date and timeUsing its internal clock, this unit adds the date and time to fileswhen they are recorded.1. Press the MENU button to open the MENU screen.2. Turn the DATA dial to select OTHERS, and press the DATAdial.The OTHERS screen opens.3. Turn the DATA dial to select DATE/TIME, and press theDATA dial.The DATE/TIME screen opens.4. Use the DATA dial or the 4/. and 3// buttons tomove the cursor (highlighted area), and turn the DATA dialto change the value.5. Press the MENU button to confirm the setting and return tothe OTHERS screen.NOTEYou can set the unit to automatically add the date set hereto file names. (See “Setting the file name format” on page35.)CAUTIONThe date and time setting can only be maintained for afew minutes if the battery power becomes low and the unitis not powered by a TASCAM PS-P515U AC adapter (soldseparately) or USB bus power.When using batteries, replace them before they completelylose power.Inserting and removing SD cardsInserting a card1. Open the front cover on the front of the unit.2. Insert an SD card as shown in the illustration until it clicksinto place.Removing a card1. Open the front cover on the front of the unit.2. Press the SD card in gently and then release it to allow it tocome out.CAUTION• Do not remove the SD card from the unit during recording,playback or at other times when it is being accessed.• Do not remove the SD card from the unit when it isconnected to a computer by USB.• SD cards that meet SD, SDHC or SDXC standards can be usedwith this unit.• A list of SD cards that have been confirmed for use with thisunit can be found on our web site. Please access to a productpage of this product from the TEAC Global Site (http://teac-global.com) to find the list or contact the TASCAMcustomer support service.