Tascam Frontier FW-1884 Manual

Also see for FW-1884: Brochure Owner's manual How to install Quick start guide Software guide

Page 19 of 35Adjusting Fader Touch Sensitivity on FE 8SEL1 + SEL3 + SEL5 + CH8 EncoderAdjust touch fader sensitivityFE 8 Use With SonarFirst, the FE 8 Control Ports must be activated in Sonar’s MIDI Devices window in orderfor them to appear in the Control Surfaces window. The FE 8 Control Ports will becomeavailable after Windows has detected the hardware and installed the driver for the FE 8.In the Control Surfaces window (shown below) under the Options menu, Sonar providesmultiple slots to insert individual control surfaces. If you have one or more FE 8sconnected, each one will appear individually in the Add New Control Surface pull downmenu when the yellow star icon is clicked. Add control surfaces in the order you wantthem to match up with mixer faders from top to bottom in the Control Surfaces window.Multiple FE 8s will be numbered & named according to their order and names in the FE8 tab of the control panel.NOTE: Sonar must be restarted for changes in this window to take effect, even thoughSonar does not prompt for this.