Tascam HD-P2 Service Manual

Also see for Frontier HD-P2: Technical information Comparison chart Owner's manual Owner's manual Release notes

Contents

Tascam HD-P2 Service Manual Manual pdf 6 page image

62. TEST MODETASCAM HD-P2Selecting Test Mode allows you to perform check operations ofthe encoder, LCD and keys, and also to get into self-diagnostics.1. Switch on the power and press the DISPLAY and PLAYbuttons at the same time.The TIMECODE, PAUSE and REC LEDs blink and as yourelease your fingers from the buttons the PAUSE LED lightssolid to indicate the test mode is engaged.2. Press the PLAY button and the unit switches into a checkmode that allows you to perform check operations of theencoder and LCD.As you rotate the encoder, a bar moves up and down on theLCD. Also, as you rotate the encoder rightwards, theTIMECODE, PAUSE and REC LEDs light in sequence toindicate the direction in which the encoder is rotated.Rotating the encoder leftwards, these LEDs light in reverseorder.3. Press the PLAY button again and the unit switches in a checkmode that allows you to perform check operations of thekeys.Press the following keys, in the indicated order.PAUSE∑REC∑HOLD∑MARKER∑LOCATE R∑LOCATE L∑RETAKE∑TIMECODE∑REW∑F.FWD∑STOP∑PLAY∑DISPLAY∑PROJECT∑MENU∑CANCEL∑SELECTIf any of the above buttons is out of order, the REC LEDblinks.4. Once the check operations of the keys are over, the PAUSELED blinks and the self-diagnostics starts.The self-diagnostics checks the internal clock, the memoryaccess, and the system clock.When nothing goes wrong, the TIMECODE LED blinks.If something goes wrong, the REC LED blinks.5. To quit test mode, unplug the AC adapter or forcibly switchoff the power.∑ ∑ ∑ ∑ ∑∑ ∑ ∑ ∑∑ ∑ ∑ ∑ ∑∑ ∑