Tascam HD-P2 Service Manual

Also see for Frontier HD-P2: Technical information Comparison chart Owner's manual Owner's manual Release notes

Contents

Tascam HD-P2 Service Manual Manual pdf 8 page image

83. Updating and Some Setting ProceduresTASCAM HD-P2Updating Procedure1. Connect the HD-P2 to a PC or Mac using a FireWire cableand select “Fire Dock” in the HD-P2’s Main menu. The mediain the HD-P2 is an external media as viewed from the PCside.2. Copy the .bin file to update to the same location as theproject.3. When the file has been copied, disconnect the HD-P2 fromthe computer.4. The HD-P2 automatically gets ready for starting the updatingprocess as it detects an updating file.5. Press the SELECT button and the updating process starts.6. When the updating process is completed, “Update Complete”is displayed.The HD-P2 automatically deletes the .bin file in question fromthe media as the updating process is over.7. Get the HD-P2 restarted.An alternative is to take out the media from the HD-P2 andmake a copy of the .bin file on the computer.Updating Multiple UnitsThe updating file used by users has the extension .bin.The HD-P2 automatically deletes this bin file from the mediumafter completion of update.So when updating multiple HD-P2’s you need to rewrite theextension .bin to, for example, .bon or .ban to prevent the filefrom being deleted.