Tascam HD-R1 Owner's Manual

Also see for HD-R1: Technical information Specifications Quick start guide Owner's manual Technical information

TASCAM HD-R1 215–Screens and MenusAdjust ContrastThis permits you to adjust the screen’s contrast usingthe SHUTTLE/DATA wheel. You may also access thisfunction by simultaneously pressing the SHIFT andCANCEL keys.Playlist DefaultsLeads to a submenu containing default settings fornew playlist entries.NOTESimultaneously pressing SHIFT+TIME keys is a shortcut tothe System SettingsDucking SubmenuThis menu contains all ducking-related settings:Ducking ModeOff, Attenuate Input, or AttenuatePlayback. When ducking is enabled, the HD-R1will mix the analog input with the recorder outputduring playback, ducking one or the other whena signal is present. Attenuate Playbackwill attenuate the playback volume any time thereis a signal at the analog input over the DuckingThreshold. Attenuate Input willattenuate the input volume any time there is aplayback signal over the Ducking Threshold.Ducking Threshold-6 dBFS, -12 dBFS, -18 dBFS, -24dBFS, -30 dBFSDucking Attenuation-3 dB, -6 dB, -9 dB, -12 dB, -18 dB,-24 dB, -Infinity. Determines the amount ofattenuation used when ducking.Ducking Hold Time0.1 sec, 0.5 sec, 1.0 sec, 1.5sec, 2.0 sec, 2.5 sec, 3.0 sec,3.5 sec, 4.0 sec, 4.5 sec, 5.0sec. The ducking control signal must remain belowthe Ducking Threshold for this manyseconds for the HD-R1 to stop attenuating.Metering SubmenuThis menu contains all meter-related settings.Meter Clip HoldFlash, 3 sec, 6 sec, 10 sec or Infinite.When set to Infinite, the overload indicator onthe display is cleared by pressing CANCEL.Meter Decay RateFast Decay, Medium Decay or SlowDecay. Determines how quickly the meter decays.Meter Peak DecayHold, Fast Decay, Medium Decay, SlowDecay or Off. Determines how quickly the peakdecays.Meter Overload Threshold-0.2 dBFS or 0 dBFS. Signals over thisthreshold cause the overload indicator to come on.Network SubmenuThis menu contains all settings that pertain to theLAN Ethernet port.Change PasswordThe password is used to limit access via the LAN. Thepassword can be from 0 to 8 characters. By factorydefault, the password is hdr1.IP AddressThe IP Address set up is displayed.IP ModeDHCP or Static. When set to DHCP, the IPAddress, IP Mask, and Gateway areobtained automatically, provided that there is a DHCPserver on the LAN. When set to Static, they mustbe set manually. DHCP is the default.IP AddressWhen in Static mode, this is used to set the IPAddress. When in DHCP mode, the IP Addressis obtained automatically, so it is simply displayedhere and cannot be modified.IP MaskWhen in Static mode, this is used to set theIP Mask. When in DHCP mode, the IP Mask isobtained automatically, so it is simply displayed hereand cannot be modified.GatewayWhen in Static mode, this is used to set theGateway. When in DHCP mode, the Gateway isobtained automatically, so it is simply displayed hereand cannot be modified.