Tascam HD-R1 Owner's Manual

Also see for HD-R1: Technical information Specifications Quick start guide Owner's manual Technical information

TASCAM HD-R1 93–Controls, Indicators and ConnectorsFront PanelSome of the following keys have additional functionswhen used in combinations, or with the shift button,indicated by labeling on the front panel. Thesefunctions are described later on in this manual.e SKIP μSkips to the previous track. If pressed whilelocated at the first track, locates to the last track.While stopped, hold down to rewind. Whileplaying, hold down for more than 1.5 seconds toskip-play backward.If you press this key at a point more than onesecond after the beginning of the track, you willlocate to the beginning of the current track.If you press this key at a point less than one secondafter the beginning of the track, you will locate tothe beginning of the previous track. (This workslike a CD player.)r SKIP ≤Skips to the next track. If pressed while locatedat the last track, locates to the first track. Whilestopped, hold down to fast-forward. While playing,hold down for more than 1.5 seconds to skip-playforward.t MARKCreates a new marker at the current time. Themarker is given a name beginning with “MARK”.i STOP ·Stops any transport motion, silences inputmonitoring. If pressed while playing, locatesto the beginning of the playlist. If pressedwhile recording, locates to the beginning of thenewly recorded track unless Main Menu ˘System Settings ˘ Resume is set toOn.o PLAY ¥Plays from the current transport location. Ifpressed while in the ready-to-record state, startsrecording. The PLAY indicator lights whenplaying or recording.p READY πWhile stopped, press to enter the ready-to-playtransport state. While playing, press to pausethe transport and press PLAY to continue. Whilerecording, press to pause the transport whilecontinuing to monitor the input and press PLAY tocontinue recording. Nothing happens if READY ispressed while the transport is already in the ready-to-record or ready-to-play state. The READYindicator lights when ready-to-play or ready-to-record.a RECORD –While stopped, press to enter the ready-to-record state, which turns on input monitoring inpreparation for entering record. While in ready-to-record, press PLAY to start recording. TheRECORD indicator lights when ready-to-recordor recording. Pressing this key while alreadyrecording will cause the HD-R1 to create a newtrack.The transport keys continue to work while you areviewing the menu screens. Pressing RECORD whileviewing a menu will enter record and automaticallyswitch the screen back to operation mode.