Tascam HD-R1 Owner's Manual Addendum

Also see for HD-R1: Technical information Specifications Quick start guide Owner's manual Technical information

Contents

TASCAM HD-R1 1HD-R1 Owner's Manual AddendumD01140320ASummary of new featuresThe following features were added in firmware version1.10.1 Web Server Based Control added2 Automatic time adjustment function addedManual conventionsThis manual addendum uses the following conventions.The names of keys, connectors and other parts of• this unit and external equipment are shown with thistypeface: MENU keyText shown on the unit display is indicated with this• typeface: OnText shown on the computer display is indicated with• this typeface: Next.Additional information is provided as necessary in TIP,• NOTE and CAUTION sections.TIPTips provide advice about ways that you can use unitfeatures.NOTENotes provide additional explanations, including specialcases.CAUTIONCautions indicate directions that must be followed toavoid the possibility of injury, damage to equipment orloss of data.Web Server Based ControlfunctionAn Internet browser can be used for some HD-R1transport controls and settings.The browsers that can be used are Internet Explorer 7 and8, Firefox 3.5.6 or later and Safari.CAUTIONTake care when connecting the HD-R1 to a network that isroute-able from the public internet. Telnet access requiresno password, so the HD-R1 can be controlled at any timeby anyone who knows the IP address.1 Start the computer and the Internet browser, andenter the IP address assigned to the HD-R1 unitafter the http:// prefix in the address (location) bar.Example: http://192.168.0.2/To check the IP address assigned to the HD-R1, checkthe IP Address item in the Network submenu ofthe System Settings menu, which is accessedfrom the MENU screen.Network submenuCAUTIONUse a private address when IP Mode is set to Static.(This limitation does not apply when a global address isacquired.)The ranges that can be used as private addresses are asfollows.Class IP address Subnet maskA 10.0.0.0 – 10.255.255.255 255.0.0.0B 172.16.0.0 –172.31.255.255 255.255.0.0C 192.168.0.0–192.168.255.255 255.255.255.0Be careful to avoid conflicting IP addresses.If your network has a LAN administrator, consult with theadministrator before making this setting.When using DHCP, the DHCP server automaticallyassigns IP addresses, so there is no need to worry aboutglobal/private addresses. However, in many cases theIP addresses differ each time that they are assigned, soyou will need to check and input the IP address eachtime. (If the DHCP server uses MAC addresses for staticassignment, the IP address will not change.)2 When the password entry screen appears onthe computer display, enter the user nameand password. The user name is HDR1 and thepassword is hdr1. (Upper and lower case letters aredistinguished in these fields.)NOTEThe user name and password are fixed and cannot bechanged.3 The transport screen (shown on the next page)appears on the computer display. You can use thisscreen almost in the same way as the transportkeys to control unit.CAUTIONNot all of the key operations available on the frontpanel of the unit can be conducted from this screen. Forexample, skipping and searching backward and forwardby clicking and holding the Prev or Next buttons is notpossible. Moreover, the screen has no equivalent to theMODE key or the SHUTTLE/DATA wheel, for example.4 To change the settings, click the Settings hyperlinkto open the settings screen.