TASCAM Portacapture X8 1Portacapture X80422.MA-3477AOverload display has been added for analog circuits.When an analog circuit overloads, the entire level meter for thecorresponding channel becomes red. This enables quick determinationof the overloading input.When it appears like this, the input is overloading and the sound couldbe distorted. If this occurs, make adjustments in the following ways sothat the sound does not distort.o Lower the volume of the sound source.o If the input source is a mic, move the mic further from the soundsource.o If distortion occurs when the input gain is HIGH, switch it to LOW.NOTEThis overload display functions the same for the meters in allrecording apps.A SOLO monitoring function has been added to theINPUT SETTINGS Screen.In the MANUAL and PODCAST apps, tapping the SOLO button on theINPUT SETTINGS Screen enables solo monitoring of the input channelbeing shown (AFL).NOTEi If inputs are stereo linked, they will be monitored as a stereo source.i Solo monitoring on the INPUT Screen is PFL.A SOLO monitoring function has been added to theMIXER Screen.In the MANUAL and PODCAST apps, tapping the meter of a track on theMIXER screen enables solo monitoring of it (AFL).NOTEi If inputs are stereo linked, they will be monitored as a stereo source.i Solo monitoring on the INPUT Screen is PFL.o Overload display has been added for analog circuits.o A SOLO monitoring function has been added to the INPUT SETTINGSScreen.o A SOLO monitoring function has been added to the MIXER Screen.o A hold function has been added to the remote control app(Portacapture Control), enabling separate holding of the unit and thecontrol app.o A shortcut to the LAUNCHER from all apps has been added.The following functions have been added or changed since firmware version 1.10.