Tascam TEAC PROFESSIONAL M-164 Owner's Manual

TASCAM M-164/M-164FX/M-164UF 23Using the internal effects (M-164FX andM-164UF)M-164FX and M-164UF units have an internal effectscapability that allows the use of an effect without connect-ing an external effect unit.These internal effects can be applied by sending signalsfrom channels 1–6, 7-8 and 9-10 to the AUX 2 bus. Thereturn signal can be sent to channels 13-14 or 15-16.AUX 2knob AUX MASTER 2knobCH 13-14orCH 15-16CH1-67-89-10InternaleffectsReturnsignal1 Use the AUX 2 knob of each channel to adjust thelevel of the channel signal sent to the effects.2 Use the AUX MASTER 2 knob to adjust the overalllevel of the signal sent to the effects.3 Use the EFFECT section rotary knob to select theeffect type. The effect types are explained in the listbelow by their corresponding numbers.No. Effect name Description1 Hall 1 Bright hall reverb suitable for drums,guitars and vocals2 Hall 2 Warm hall reverb suitable for acousticguitars, pianos and vocals3 Room 1 Simulation of a room with hardwoodwalls and floor suitable for acousticinstruments4 Room 2 Ambience suitable for acoustic mixesand synth sounds5 Room 3 Warm room sound suitable for guitarsand rhythm instruments6 Plate 1 Classic plate reverb suitable for leadvocals and lead instruments7 Plate 2 Bright and showy plate reverb suitablefor vocals and drums8 Plate 3 Short vintage plate reverb suitable forsnare drums and guitars9 Chorus Stereo chorus suitable for guitars andpianos10 Flange Stereo flanger creates a jet-like sound11 Delay 1 125-ms slapback delay suitable forvocals and guitars12 Delay 2 190-ms delay suitable for percussivearpeggios13 Chorus/Room 1 Chorus/reverb suitable for guitars,synths and pianos14 Chorus/Room 2 Autowah guitar effect with reverbsuitable for lead instruments15 Vocal Cancel Effect that reduces the lead vocalsfrom commercial CDs and othersources16 Rotary Speaker Emulation of a rotary speaker suitablefor organs and guitars4 − Using the mixer