Tascam US-144 Owner's Manual
Also see for US-144: Owner's manual
                            | |
Contents
| 
TASCAM US-144 1This chapter lists frequently asked ques-tions related to recording with Cubase LE,with answers to these questions.Q. I have finished making inputsettings, but the meter of theaudio track is not moving.A. Make sure that the monitor button ofthe track is enabled.Q. I would like to record twochannels simultaneously for astereo recording.A. Before you record, press the stereo/mono select button of the track so that theyellow indicator is lit. In this case, thetrack input is shown as In 1 + In 2 or asimilar indication.Q. I am trying to use the EQ,but it does not seem to do any-thing.A. Check the VST channel settings etc. tomake sure that EQ bypass is not enabled.Q. I mixed-down a song thatwas three minutes long, butthe result was only ten secondslong.A. Make sure that the left and right locatorregion is set to the entire range that youwant to mix down.Q. I cannot set the locatorregion to more than ten min-utes.A. The default setting is ten minutes.From the Project menu, choose ProjectSetup and adjust the length of the project.MonitorMonitorStereo/mono selectStereo/mono selectEQ bypassEQ bypass7 – Troubleshooting |
Related manuals for Tascam US-144
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine