14 TASCAM US-1x25 – Using the Settings PanelCustom page1 IN 1 volume sliderUse to adjust the volume input through the unit's IN1 jack.2 Input selectionUse to set whether the input signal is handled as “Mono” or“Stereo”.OptionsMonoWhen using one mic (connected to the IN1 jack), it willbe treated as input from both “IN 1” and “IN 2”.The audio from “IN 1” will be heard from both left andright headphone channels.In most circumstances, select this when using a mic fora live broadcast, for example.StereoEven when using one mic (connected to the IN1 jack),it will not be treated as being input from both “IN 1”and “IN 2”.It will be treated as only being input from “IN 1”.The audio from “IN 1” will be heard from the left head-phone channel, and audio from “IN 2” will be heardfrom the right headphone channel.Use this if a keyboard or other stereo audio sources isbeing input for live broadcasting or karaoke.NOTEWhen DAW mode is selected, if set to “Mono”, this will auto-matically be switched to “Stereo”.3 IN 2 volume sliderUse to adjust the volume input through the unit's IN2 jack.4 PC Audio Out volume sliderUse to adjust the playback volume of Windows Media Playerand karaoke apps.5 BROADCAST Volume sliderUse to adjust the playback volume of Sound Recorder and ka-raoke apps. Use this also to adjust the broadcast volume withlive broadcast apps.NOTEDouble-click a volume slider to reset it to its default value.6 OutputUse to set whether the output signal is handled as “Mono” or“Stereo”.OptionsMonoOnly the audio from the left side can be handled whenusing some applications. When using an applicationlike this, audio from the right side cannot be transmit-ted or recorded.Set to “Mono” to mix both left and right signals tomono and transmit that sound to the computer.StereoSet when the application being used supports stereo.When set to “Stereo”, a stereo sound can be transmit-ted to the computer.NOTEWhen set to “Mono”, all stereo input signals will be convertedto mono. This setting receives priority even if the “Input” se-lection (2) is set to “Stereo” for mic input.7 Mic Monitor selectionIf the “Mic Monitor” checkbox has a check, sounds from micand other input will be mixed with the “PC Audio Out” signaland looped back to the computer.If the check is removed from the “Mic Monitor” checkbox,sounds from mic and other sources input through IN 1 andIN 2 will not be sent to the headphone output.8 Loopback selectionIf the “Loopback” checkbox has a check, the sound from thecomputer will be broadcast and output from the PHONESjack.If the check is removed from the “Loopback” checkbox,the sound from the computer will only be output from thePHONES jack.9 External Effects (ASIO)To use an echo on mics and other signals input to the unit byusing an external effect, check the “External Effects (ASIO)”checkbox.CAUTIONDepending on the broadcast software settings, the signalcould loop and cause feedback.NOTEEven if you have removed the check from the “External Ef-fects (ASIO)” checkbox, the check will automatically be addedwhen you select DAW mode.0 External Effects switchWhen a check is in the “External Effects (ASIO)” checkbox,this switch will be set to the “External Effects” side and light.q Custom SaveClick to save the “Custom” page settings.You can use these settings when the “Operating Mode” itemis set to “Custom” on the “Home” page.