Tascam US-1x2 Reference Manual

Also see for US-1x2: User manual

TASCAM US-1x2 53 – InstallationSystem requirementsCheck the TEAC Global Site (http://teac-global.com/) for thelatest information about supported operating systems.WindowsSupported operating systemsWindows 10 32-bitWindows 10 64-bitWindows 8.1 32-bitWindows 8.1 64-bitWindows 7 32-bit SP1 or laterWindows 7 64-bit SP1 or later(Windows 8, Windows Vista and Windows XP are not supported)Computer hardware requirementsWindows computer with a USB 2.0 portCPU/processor speed2 GHz or faster dual core processor (x86)Memory2 GB or moreCAUTIONO p e ra t i o n o f t h i s u n i t w a s co n f i r m e d u s i n g s t a n -dard computers that meet the above requirements.This does not guarantee operation with all computers thatmeet the above requirements. Even computers that meet thesame system requirements might have processing capabili-ties that differ according to their settings and other operatingconditions.Mac OS XSupported operating systemsmacOS Sierra (10.12 or later)OS X El Capitan (10.11 or later)OS X Yosemite (10.10 or later)Computer hardware requirementsMac with a USB 2.0 portCPU/processor speed2 GHz or faster dual core processorMemory2 GB or moreApple iOS devicesSupported operating systemsApple iOS device running iOS 7 or laterSupported audio driversWindows: ASIO2.0, WDMMac: Core AudioiOS device: Core Audio for iPhoneInstalling the dedicated softwareTo use this unit, a dedicated software must be installed on acomputer.Download the latest dedicated software for the operating sys-tem you are using from the TEAC Global Site (http://teac-glob-al.com/).0 On a Windows computer, this will install the Windows driverand Settings Panel application.0 Installing the dedicated software on a Mac will install only theMac Settings Panel application. The standard OS driver will beused.0 With an iOS device, the standard OS driver will be used, sothere is no need to install any.CAUTIONBefore starting to install software, quit other applications.Installing the Windows dedicated softwareFollow the procedures below to install the Windows dedicatedsoftware.CAUTIONi Complete installation of the Windows dedicated software onthe computer before connecting the unit to it with the USBcable.i If you already connected the unit to the computer using theUSB cable before installing the Windows software and theFound New Hardware Wizard launched, close the messageand disconnect the USB cable.Windows software installation procedures1. Download the latest Windows dedicated software for theoperating system you are using from the TEAC Global Site(http://teac-global.com/) and save it on the computer tobe used with the unit.2. Uncompress the saved software (zip file) on the computerdesktop or another location.3. Double-click the “TASCAM_US-1x2_Installer_x.xx.exe” file inthe folder that appears after uncompression to automatical-ly launch the installation software.CAUTIONIf you open a zip file without decompressing it and double-click the “TASCAM_US-1x2_Installer_x.xx.exe” file in the folderthat opens, installation will not start. Right-click the zip fileand select “Extract All”, for example, to decompress it andthen try again.4. When a “Security Warning” or “User Account Control”screen appears, click the “Yes” button.