Tascam US-2000 Owner's Manual
Also see for US-2000: Quick start guide
                        | |
Contents
| 
TASCAM US-2000 11Frequently asked installation questions andanswers (FAQ)Windows driver installationQ: When I connect the unit to a computer, the Windows“Hardware Wizard” appears and I cannot install thedriver. Am I making a mistake in the installationprocedures?A: Close the Windows “Hardware Wizard” and disconnectthe unit. You must install the driver before connectingthis unit. Insert the CD-ROM included with the product.The menu for installing the driver appears automatically.Select “Install Driver,” and follow the instructionsshown on the screen. If you have downloaded the driverfrom the TASCAM website (htt://www.tascam.com),expand the ZIP archive, launch the “setup.exe” file, andfollow the instructions on the screen.Q: I loaded the installation CD-ROM into a Windowscomputer, but the driver installation menu does notappear. How can I access this menu?A: The automatic playback settings for the disc drive mightbe disabled.Open the CD-ROM using Windows Explorer, anddouble-click the “Autorun2.exe” file to manually openthe installation menu.Settings on your computerHere are a few basic points to help you set up yourcomputer for best performance with audio applications.Do not run other applications. You will probably use•your computer for applications other than audio, but werecommend that you avoid running other applicationsat the same time you are running audio programs.Processing digital audio places a considerable load onyour computer.This means that if you are running other applications(especially graphics or Internet tools) at the same time asyour audio application, the processing may not happenfast enough.Installing Cubase LE4For details see the Cubase LE4 Quick Start Guide.Installing the driver for Mac OS XConfirm that the US-2000 is not connected to the1computer.Double-click the “TASCAM_US2000_Driver_x.xx.2dmg” on the included CD-ROM. As the “TASCAM_US-2000_x.xx” is created on the desktop, open thefolder.Dboule-click the “TASCAM_US-2000_x.xx.mpkg” in3the folder to launch the installer.Follow the instructions on the screen to conduct the4installation.Restart the computer and then connect the unit.5Uninstalling the driverWindowsªThere are two ways to uninstall the driver as shown below.Using the Installation CD-ROM:Follow steps 1 to 4 under “Installing the driver for1Windows” (See page 10.)At step 5 of the procedure, click “Remove the driver”.2Follow the instructions on the screen for the3remaining procedure.Using Windows “Add or Remove Programs” :Open the “Control Panel” from the “Start” menu.1Double click on “Add or Remove programs”.2Select “US-2000 driver” from the list and click3“Change or Remove Programs”.Follow the instructions on the screen for the4remaining procedure.Mac OS XªInsert the CD-ROM into the PC and double click1“TASCAM US-2000 Remover” icon.Follow the instructions on the screen for the2remaining procedure.3 − Installation |
Related manuals for Tascam US-2000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine